1.裁料。一般所用工具是电剪刀，它可裁2mm以下的薄板，但裁出后平整程度不好。还有裁板机，厚板、薄板均可裁出， 但只能裁直线，遇到弧线就无能为力了。要让山东不锈钢雕塑板料裁下既平整又多种形状的话，就用等离子切割。 Cut material. Commonly used tool is electric scissors, it can be Cut 2mm of the following sheet, but the flatness is not good. There are cutting machine, plate, sheet can be cut out, but can only cut a straight line, there is nothing to do to meet the arc. To make Shandong stainless steel sculpture plate material is not only the formation of a variety of shape, then, with plasma cutting.
2.锻打。山东不锈钢雕塑板拿到模具上实打实地去敲，根据模型每个部分不同的形状把料下出，依照其起伏变化，进行有意识地敲 打，该弯的地方敲弯，该棱的地方敲棱，可在任何有形的结实的物体上进行敲打，然后把敲好的不锈钢板拿到模具上去比较， 认为形体正确并完全可以与模型合上，再把这些零散的碳钢板、不锈钢板从上至下一块块焊接起来，每接上一块都要对着模具 进行调整，每块不锈钢板表面的肌理效果都要保持相同，这须在做形的同时锻制上去。Forge. Shandong stainless steel sculpture plate mold to get hard knock, according to the model of each part of different shapes under the material, in accordance with its ups and downs, conscious beat, the curved edge of the place where the clinched, knock edge, can be strong in any tangible objects get beat, and then put on stainless steel good to get the mold plate, and can form correct thought and model, and then put these scattered carbon steel plate, stainless steel plate welded together from top to bottom pieces, each connected to a block to adjust each mold, the surface of the stainless steel plate texture effect will remain the same, it shall in the shape of forging at the same time.
3.成型: 焊接、打磨及喷漆。形体锻造正确后，就要依照作品要求把它们焊接到一起（有电焊和氩弧焊）。山东不锈钢雕塑抛光首先用 砂轮片把制作作品的焊缝和多余的地方磨平，然后用软轮（布轮）进行抛制，抛光时作品涂上抛光膏增加润滑，使作品抛出来 更光亮，从而给人一种良好的视觉美感。Molding: welding, polishing and painting. After the form is forged, it must be welded together in accordance with the requirements of the work (with welding and argon arc welding). Shandong stainless steel sculpture polishing first grinding wheel to weld production and spare place removed, and then use soft round (cloth) were thrown, polishing works with polishing paste increase lubrication, so that works out more light, which gives a good visual sense of beauty.
4.最后一步就是安装：一般为焊接，较牢固，即雕塑本身的骨架与基座上预埋铁焊接，预埋铁下边焊接钢筋，根据山东不锈钢雕塑的尺寸来确定钢筋的长度以及预埋铁的大小。为了美观，安装山东不锈钢雕塑完毕后，基座会粘贴大理石或者花岗岩板材。 The last step is to install: General for welding, fixedder, sculpture and the base itself on the framework of embedded iron welding, welding of steel embedded iron below, to determine the size of the length of the reinforcing steel bar and the embedded iron according to the size of the stainless steel sculpture of Shandong. In order to beautiful, the installation of Shandong stainless steel sculpture is completed, the base will paste marble or granite.